1.Aperture: controls the area over which light can enter your camera. Shutter speed: controls the duration of the exposure. ISO speed: controls the sensitivity of your camera’s sensor to a given amount of light

2.The reason you should change your ISO is because you’re targeting a specific shutter speed

3.Aperture Priority lets you choose the aperture setting you want, but the camera chooses the shutter speed. Shutter Priority  lets you choose the shutter speed you want, but the camera chooses the aperture setting

4.: Set the lens to AF mode. Most brands have a button on the lens and the camera body to switch between AF and MF mode

5.Incident light metering will give you consistently correct exposure results, because it won’t be fooled by subject reflectivity

6.It means that if you want to copy the white balance settings from one image and paste them onto another that was taken with a different camera make or model, your final images might not look the same

7.Depth of field is the area of acceptable sharpness in front of and behind the subject which the lens is focused

8.The metering mode determines which areas of the frame are used by the camera to measure subject brightness and how the camera sets exposure

9.Exposure compensation is a technique for adjusting the exposure indicated by a photographic exposure meter, in consideration of factors that may cause the indicated exposure to result in a less-than-optimal image


Leave a Reply

Your email address will not be published. Required fields are marked *